Retrieval of measuring data from calibration or from measuring of heat of hydration

1. Connect the USB-cable to the datalogger and to a PC where both the Testo software and the Heat-Box software are installed.
2. Start the testo software ("testo Comfort Software Basic 5.0") and select " Import measurement data ".
3. Select the "testo 175/176" device and press "Connect". This will bring up the "Import measurement data" window as shown below

4. Click the "Start import" button. This will load the data as shown below.

5. Now mark all the measured data in the table. This can be done by clicking in the first row and then pressing ctrl-shift-end. Then copy to the clipboard by pressing ctrl-c.